Do something for our planet, print this page only if needed. Even a small action can make an enormous difference when millions of people do it!
The WISE Water Framework Directive maps contain information from the River Basin Management Plans (RBMPs) reported by EU Member States, Norway and the United Kingdom according to article 13 of the Water Framework Directive (WFD). The maps include the River Basin Districts (RBDs) and their sub-units, the surface water bodies (water body category, ecological status or potential and chemical status), the groundwater bodies (aquifer type, quantitative status and chemical status) and the monitoring sites
The Quality Elements map contains information from the River Basin Management Plans (RBMPs) reported by EU Member States, Norway and the United Kingdom according to article 13 of the Water Framework Directive (WFD). The map shows the quality element status or potential for the European surface water bodies. The Quality Element status layer contains the ecological status or potential based on the quality element status value (i.e. the lowest of the known quality element status values per waterbody).
Latest measurements from Europe's air quality monitoring network
We all want to know the quality of 'our' local bathing area, beach or lake, and whether it conforms to EU standards. Below you will find a map viewer that will allow you to view on-line the quality of the bathing water in the around 22 000 coastal beaches and freshwater bathing waters across Europe.
The urban waste water treatment map shows the most recently reported information on the implementation of the Urban Waste Water Treatment Directive (UWWTD). It is based on data from 2020 in EU-27 (2020) countries plus Iceland, which were reported by countries in 2022. Data are provisional, pending compliance assessment by the European Commission.
This map shows bathing water locations and their quality for the latest as well as previous bathing seasons. All symbols are coloured according to achieved quality status in the most recent season. Data are presented on two levels: country (less detailed scales) and bathing water (more detailed scales).
Change of vegetation productivity during the years 2000-2016. Vegetation productivity was calculated for each 500m grid cell from a remote sensing derived vegetation index (PPI). The layer shows the changes expressed in % of 2000 calculated from the fitted line of the linear trend model.
These maps present a story about how Europe might be affected by key climate hazards such as droughts, floods, forest fires and sea level rise during the 21st century and beyond. These maps are based on different greenhouse gas emissions scenarios and climate models and have been published already in various EEA reports and indicators.
The map shows the temporal development of the distribution of warm-favouring (Lusitanian) fish species and of cool-favouring (Boreal) fish species by statistical area in yearly intervals, 1967 to 2022.
For visualisation purposes, the initial 100 m spatial resolution Corine Land Cover dataset was re-sampled to a 10 km2 grid. The observation periods can be visualised by activating the 'layers' icon and selecting the respective periods.
This web map application uses the new version of the Effective Mesh Density (seff) 2016 dataset with improved input data, for the years 2009, 2012 and 2015. This new dataset uses the Copernicus Imperviousness and the TomTom TeleAtlas data sets as fragmenting geometries. The application shows the change in effective mesh density (seff), i.e. the number of landscape elements between 2009 and 2012 and between 2012 and 2015.
The map viewer of the Integrated Data Platform visualizes spatial datasets by web map services. Those spatial datasets are selected which are frequently used in assessments. The web map viewer enables spatial overlays so that the datasets can be interactively explored. Through exploring the datasets their potentials in environmental assessments can be better understood.
The map shows an overview of protected sites in Europe. The EU’s Natura 2000 network and the Bern Convention’s Emerald Network are ecological networks of protected areas, set up to ensure the survival of Europe's most valuable species and habitats. Information about protected areas designated at national levels is reported by the 38 countries of Eionet.
The map reflects the most recent available information at the EU-level on implementation of the Urban Waste Water Treatment Directive (UWWTD) in EU 28 plus Iceland based on data reported by the Member States (for reference year 2016) in 2018.
The intensity of land take is calculated as land take in the given period as a percentage of the area of artificial surfaces in 2000. For easier comparability, land take is summarised within NUTS3 regions.
This map shows bathing water locations and their quality for the latest as well as previous bathing seasons. All symbols are coloured according to achieved quality status in the most recent season. Data are presented on two levels: country (less detailed scales) and bathing water (more detailed scales).
NEW MOBILE APP AVAILABLE FOR DOWNLOAD --- How clean is the air you’re breathing right now? How does the air in your city compare with that of a neighbouring city or region? Air pollution is the single largest environmental health risk in Europe. The European Environment Agency's European Air Quality Index allows users to understand more about air quality where they live. Displaying up-to-the-minute data for the whole of Europe, users can gain new insights into the air quality of individual countries, regions and cities.
This interactive map gives a European overview of water stress conditions. The information presented may deviate from that available in the EEA member countries and cooperating countries, particularly for those countries where data availability is insufficient in the WISE SoE - Water quantity database (WISE 3). Data on hydro-climatic variables were aggregated from a daily to a monthly scale. Water abstraction data were taken from WISE 3 (annual resolution at the national scale), although there are large gaps in the time series. Therefore, intensive gap filling was performed on water abstraction data and proxies were used to disaggregate the data from the national to the sub-basin scale. Information on water use was mainly modelled on the UWWTP capacities, the E-PRTR database and the Eurostat Population change dataset (online data code [demo_gind]) among others. See the methodology chapter for further explanation of gap filling, and spatial and temporal disaggregation, and the data uncertainties chapter for current data availability. This interactive map allows users to explore changes over time in water abstraction by source, water use by sector and water stress level at sub-basin or river basin scale. The WEI+ has been estimated as the quarterly average per river basin district for the years 1990-2015, as defined in the European catchments and rivers network system (ECRINS). The ECRINS delineation of river basin districts differs slightly from that defined by Member States under the Water Framework Directive. The Ecrins delineation is used instead of the WFD because it contains geospatial information on Europe’s hydrographical systems with full topological information enabling flow estimation between upstream and downstream basins, as well as integration of economic data collected at NUTS or country level. In addition to using the WISE SoE - Water quantity database, comprehensive manual data collection was performed by accessing all open sources (Eurostat, OECD, FAO), including national statistical offices of the countries. This was done because of the temporal and spatial gaps in the data on water abstraction. Moreover, a large part of the stream flow data from LISFLOOD has also been substantially updated by the Directorate-General Joint Research Centre. Similarly, a comprehensive update with climatic parameters has been performed by the EEA based on the E-OBS dataset. Therefore, the time series of the WEI+ presented in the current version might be slightly different for some basins compared with the previous version.
Land recycling addresses the reuse of abandoned, vacant or underused urban land for new developments within FUAs (Functional Urban Areas, i.e. urban agglomerations). Land recycling is considered a response to land take within FUAs, i.e. urban development on arable land, permanent crop land or semi-natural areas. It is a key planning instrument for achieving the goal of no net land take by 2050 (EC, 2016).
This map illustrates the overall pressures to water from the aggregated releases of the eight heavy metals. Values (in kilograms) of the individual releases are first multiplied by a respective ‘eco-toxicity factor’, sourced from the USEtox model. Results are then aggregated, first by facility and then illustrated spatially using a standard heat map tool.
For references, please go to https://www.eea.europa.eu/data-and-maps/explore-interactive-maps/all-viewers or scan the QR code.
PDF generated on 21 Nov 2024, 02:52 PM
Engineered by: EEA Web Team
Software updated on 26 September 2023 08:13 from version 23.8.18
Software version: EEA Plone KGS 23.9.14
Document Actions
Share with others